Coil Element Surface
Notes:
•Clean cooktop after each use.
•Wipe acidic or sugary spills as soon as the cooktop has cooled as these spills may discolor or etch the porcelain.
To protect drip bowl finish:
•To lessen discoloration and crazing, avoid using high heat for long periods.
•Do not use oversized cookware. Pans should not extend more than
•When home canning or cooking with big pots, use the Canning Element (Model CE1). Contact your dealer for details or call
•Clean frequently. (See page 6.)
Coil Elements
•When an element is on, it will cycle on and off to maintain the heat setting.
Oven Cooking
Manual Clean Oven Electronic Control (select models)
• Coil elements are
To remove: When cool, raise element. Carefully pull out and away from receptacle.
To replace: Insert element terminals into receptacle. Guide the element into place. Press down on the outer edge of element until it sits level on drip bowl.
TERMINALS
Drip Bowls
The drip bowls under each surface element catch boilovers and must always be used. Absence of drip bowls during cooking may damage wiring.
To prevent the risk of electric shock or fire, never line drip bowls with aluminum foil.
Drip bowls will discolor (blue/gold stains) or craze over time if overheated. This discoloration or crazing is permanent. This will not affect cooking performance.
A B
ABake
BBroil
CTimer
DClock
ECancel
FMore (▲) or Less (▼)
C D E F
Use for baking and roasting.
Use for broiling and top browning.
Sets timer.
Use to set
Cancels all operations except timer and clock.
Enters or changes time, oven temperature. Sets HI or LO broil.
Important: The display will show 12:00 when the appliance is first connected to power or if power is interrupted. The Bake and Broil indicators light when function is pressed.
Using the Touchpads
•Press the desired pad.
•Press the ▲ or ▼ pad to enter time or temperature.
•A beep will sound each time a function pad is pressed. There is no beep for the ▲ or ▼ pad.
•A double beep will sound if a programming error occurs.
Important: Four seconds after pressing the ▲ or ▼pad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the ▲ or ▼ pad, the function will be canceled and the display will return to the previous display.
Cont.
12
