Amana Electric Range - Coil Delay Bake, To set Cook & Hold, When the cooking time has elapsed

Models: Electric Range - Coil

1 66
Download 66 pages 30.11 Kb
Page 17
Image 17
Baking Differences Between Your Old and New Oven

100° or the actual oven temperature will display. The temperature will rise in 5° increments until the preset temperature is reached.

4.Allow the oven to preheat for 8-15 minutes.

When the set oven temperature is reached, one long beep will sound.

To recall the set temperature during preheat, press the Bake pad.

5.Place food in center of oven, allowing a minimum of two inches between utensil and oven walls.

6.Check cooking progress. Cook longer if needed.

7.When cooking is finished, press Cancel.

8.Remove food from the oven.

Notes:

To change oven temperature during cooking, press the Bake pad, then press the ▲ or ▼ pad until the desired temperature is displayed.

To change oven temperature during preheat, press the Bake pad twice, then press the ▲ or ▼ pad until the desired temperature is displayed.

If you forget to turn off the oven, it will automatically turn off at the end of 12 hours. If you wish to deactivate this feature, see page 18.

Baking Differences Between Your Old and New Oven

It is normal to notice some baking time differences between a new oven and an old one. See Adjusting the Oven Temperature on page 17.

Cook & Hold

Cook & Hold allows you to bake for a preset amount of time, followed by a one-hour Keep Warm cycle.

To set Cook & Hold:

1. Press the Cook & Hold pad.

BAKE and HOLD flash.

000 lights in the display.

2.Select the oven temperature. The oven temperature can be set from 170° to 550°. Press

or press and hold the ▲ or ▼ pad.

Press the ▲ pad to increase the temperature.

Press the ▼ pad to decrease the temperature.

3.Press Cook & Hold again

OR

wait four seconds.

HOLD flashes.

00:00 flashes in the display.

4.Enter the amount of time you want to bake by pressing the ▲ or ▼ pad. Bake time can be set from ten minutes (00:10) to 11 hours, 59 minutes (11:59).

BAKE and HOLD light in the display.

The baking time will light in the display.

The baking time will start counting down.

When the cooking time has elapsed:

Four beeps will sound.

BAKE will turn off.

HOLD and WARM will light.

170° will display.

After one hour in HOLD WARM:

END will display.

The time of day reappears in the display.

To cancel Cook & Hold at any time:

Press the Cancel pad. Remove food from oven.

Delay Bake

Cook & Hold CAUTION

Do not use delayed baking for highly perishable foods such as dairy products, pork, poultry, or seafood.

When using Delay, the oven begins to cook later in the day. Set the amount of time that you want to delay before the oven turns on and how long you want to cook. The oven begins to heat at the selected time and cooks for the specified length of time, then keeps food warm for up to one hour.

Delay time can be set from 10 minutes (00:10) to 11 hours, 59 minutes (11:59).

To set a Delayed Baking cycle:

1.Press the Delay pad.

DELAY flashes.

00:00 flashes in the display.

2. Press the ▲ or ▼ pad to set the delay time. While DELAY is still flashing:

3. Press the Cook & Hold pad.

• 000 lights in the display.

• BAKE and HOLD flash.

4.Press ▲ pad to set the baking temperature.

00:00 and HOLD flash.

BAKE stays lit.

5.Press ▲ pad to set the baking time.

Cont.

16

Page 17
Image 17
Amana Electric Range - Coil manual Delay Bake, Baking Differences Between Your Old and New Oven, To set Cook & Hold