Amana Electric Range - Coil Manual Clean Oven, Self-Clean Oven Control, Clock, select models

Manual Clean Oven

Knob Control (select models)

Oven Temp Knob

The Oven Temp Knob is used to select and maintain the oven temperature. Always turn this knob just to the desired temperature. Do not turn

to a higher temperature and then back.

Setting the Control for

Baking and Roasting:

1.Push in and turn Oven Temp knob to desired temperature. Allow 10-15 minutes for preheating.

2.Place food in the center of oven. Check food for doneness at minimum time in recipe. Cook longer if necessary.

Self-Clean Oven Control

(select models)

A BC D

3.Remove food from the oven and turn the Oven Temp knob to OFF.

Setting the Control for Broiling:

1.For best results, use a broiling pan. Place the broiler pan on recommended rack position (see chart on page 19).

2.Turn Oven Temp knob to Broil or, for lower temperature broiling, to 450° F.

•Lower temperature broiling avoids excessive browning of longer-cooking foods such as poultry.

3.Preheat broil element for three minutes. Broil with the oven door open to the first stop position (about 4 inches).

4.Check the doneness by cutting a slit in the meat near the center to check the color.

5.After broiling, turn the Oven Temp knob to OFF. Remove the broiler pan from the oven.

	E	F	G	H	I	J
A	Broil	Use for broiling and top browning.
B	Bake	Use for baking and roasting.
C	More (▲) or	Enters or changes time, oven
	Less (▼)	temperature. Sets HI or LO broil.
D	Timer	Sets timer.
E	Cook & Hold	Bakes for a preset time, then holds food
		warm for 1 hour.
F	Clean	Use to set self-clean cycle.
G	Delay	Programs the oven to start baking at
		a later time.
H	Clock	Use to set time-of-day clock.
I	Keep Warm	Use to keep cooked food warm in oven.
J	Cancel	Cancels all operations except timer
		and clock.

Using the Touchpads

•Press the desired pad.

•Press the ▲ or ▼ pad to enter time or temperature.

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions. Control panel shown includes model specific features. (Styling may vary depending on model.)

•A beep will sound when any pad is touched.

•A double beep will sound if a programming error occurs.

Important: Four seconds after pressing the ▲ or ▼pad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the ▲ or ▼ pad, the function will be canceled and the display will return to the previous display.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To change the clock to

24-hour format:

1. Press and hold the Cancel and Delay pads for three seconds.

2.Press the ▲ or ▼ pad to select 12 or 24 hour.

3.Set the time of day following the directions on page 13.

Cont.

14