TELESERVICES:
The buttons ∗ and # are function- buttons, needed for divers telecom- services (teleshopping, telebanking, etc) or to control divers telecom devices (PABX, answering machines, etc). Refer to the concerning manual.
RECEIVER VOLUME CONTROL: The receiver volume control is located on the base of your phone. This ena- bles you to adjust the receiver volume from normal to high for a more com- fortable listening level.
MEMORIES
The
3
10
Each telephonenumber can be as long as 16 digits maximum
PROGRAMMING:
1.pick up the handset and put it aside
2.press the STORE button and release it
3.key in the telephone number on the keyboard (max 16 digits)
4.press STORE again
5.press one of the three memory buttons (M1, M2 or M3) or one of the keys
6.repeat steps 2 to 5 for the other memory positions
7.replace the handset
DIALING FROM MEMORY:
1.pick up the handset or press the HANDSFREE button and wait for the dialtone
2.press one of the three memory buttons (M1, M2 or M3) or press button MEMO followed by one of the keys
3.the programmed number will automatically be dialed
Remarks:
When your telephone is connected to a PABX system, it is advised to inclu- de a
Refer to the chapter “PAUSE”.
It's not possible to erase a memory position, just reprogram it to erase the present number.
VOICE MAIL (MESSAGE WAITING)
When you have activated your per- sonal Voice Mail, after 5 rings the cal- ler will be connected to your mailbox and has the possibility to leave a message.
13
