Be careful not to pinch the Upright

4. Hold the Left Upright (89) against the Base	4
(94). Be careful not to pinch the Upright	4
Wire (81). Insert two 3/8" x 1 1/4" Bolts (8) with			81
two 3/8" Star Washers (13) and two 3/8" x			81
2 3/4" Bolts (7) into the Left Upright.		89
Partially tighten the 3/8" x 2 3/4" Bolts (7) and		89
the 3/8" x 1 1/4" Bolts (8) until the heads of the
Bolts touch the Left Upright (89); do not fully
tighten the Bolts yet. Note: Use the short hex
key.
Attach the Right Upright (not shown) in the		7
same way. Note: There are no wires on the		7
right side.	13
	13
	8	13	94
5. Identify the Left Base Cover (82) and the Right	5
Base Cover (83). Slide the Left Base Cover onto	5
the Left Upright (89). Slide the Right Base Cover			80
onto the Right Upright (90). Do not press the			80
Base Covers into place yet.
Identify the Left Upright Cover (79) and the			90
Right Upright Cover (80). Slide the Left Upright		89	90
Cover onto the Left Upright (89). Slide the Right		89
Upright Cover onto the Right Upright (90).		79	83
			83
		82
	8

Page 8

Image 8

ProForm 1080 warranty Be careful not to pinch the Upright, Tighten the Bolts yet. Note Use the short hex

Contents

QUESTIONS? Model No. PFTL11010.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEB Table of Contents Important Precautions Save These Instructions Before YOU Begin Assembly Wrench Scissors Make sure that the power cord is unplugged See the inset drawing. Tie the wire tie Be careful not to pinch the Upright Tighten the Bolts yet. Note Use the short hexAttach the Right Upright not shown Base Covers into place yet Attach the Right Handrail 87 in the same way Again. if YOU do not Connect the CON Important To avoid damagingShown. Start all four Screws, and then tighten Each of them All four Bolts, and then tighten each ThemPage Cardboard Page PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console DiagramFeatures of the Console HOW to Turn on the Power HOW to USE the Manual ModeInsert the key into the console Select the start menuPage Measure your heart rate if desired. Before using HOW to USE a SET-A-GOAL Workout Start the workout Start the workout See on HOW to USE the Ifit Live Mode Connect your treadmill to your own wireless networkSelect the iFit Live mode Ifit Live FCC Information HOW to USE the Stereo Sound System HOW to USE the Settings ModeSelect the settings mode Select the wireless network mode Log in to your iFit Live account Change the international settingsExit the settings mode HOW to USE the Maintenance Mode Calibrate the screen Exit the maintenance mode View technical information HOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Outlets TroubleshootingProblem The power turns off during use Turn if the walking belt has shifted to the right Problem The walking belt slows when walked onTop Problem The iFit Live mode does not function correctly Problem The buttons on the screen do not work correctly Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise Frequency Suggested Stretches Part List Key No. Qty Description Qty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

ProForm 1080 Be careful not to pinch the Upright, Tighten the Bolts yet. Note Use the short hex

Models: 1080

(94). Be careful not to pinch the Upright

tighten the Bolts yet. Note: Use the short hex

Attach the Right Upright (not shown) in the

Base Covers into place yet.