HOW TO USE THE EQUIPMENT SETTINGS MODE
The console features an equipment settings mode that allows you to select a language and the unit of measurement, to turn on and turn off the display demo mode, and to enable or disable the key.
1. Select the settings main menu.
Insert the key into the console (see HOW
TO TURN ON THE POWER on page 18). Next, select the main
menu (see step 2 on page 20). Then, touch
the gears button near the lower right corner of the screen to select the settings main menu.
2.Select the equipment settings mode.
In the settings main menu, touch the Equipment Settings button.
3.Select a language.
To select a language, touch the Language button and select the desired language. Then, touch the back button on the screen to return to the equip- ment settings mode. Note: This feature may not be enabled.
4.Select the unit of measurement.
Touch the US/Metric button to view the selected unit of measurement. Change the unit of measure- ment, if desired. Then, touch the back button on the screen.
5.Turn on or turn off the display demo mode.
The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the
reset position, and insert the key into the console. However, when you remove the key, the screen will show a demo presentation.
To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox. Then, touch the back button on the screen.
6.Enable or disable the key.
Note: This feature may not be enabled on your treadmill.
You can disable the key so that the treadmill does not require the use of the key if desired. Touch the Safety Key button. To disable the key, touch the Disable checkbox. CAUTION: Read the safety warning on the screen before disabling the key. To enable the key again, touch the Enable checkbox.
7.Enable or disable a passcode.
The console features a child safety passcode, designed to prevent unauthorized users from using the treadmill.
Touch the Passcode button. To enable a passcode, touch the Enable checkbox. Then, enter a
Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct pass- code is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985.
8.Exit the equipment settings mode.
To exit the equipment settings mode, touch the back button on the screen.
25
