7. Attach the Left Handrail (88) to the Left Upright

7

 

 

 

 

 

(89) with two 5/16" x 1" Screws (5), two 5/16"

 

 

 

 

 

 

 

 

 

4

 

Star Washers (11), and a 5/16" x 1 1/4" Bolt (4).

 

 

 

 

 

Do not fully tighten the Screws and Bolt yet.

 

 

 

 

11

87

Attach the Right Handrail (87) in the same

 

 

 

5

5

 

way.

 

11

 

 

 

4

 

 

88

 

 

 

 

 

 

 

 

 

 

89

 

 

 

8. Set the console assembly face down on a soft

8

 

 

 

 

 

surface to avoid scratching the console assem-

 

 

 

 

Console

A

 

 

 

 

bly. Remove the two Screws (A). Next, lift off the

 

 

 

 

 

 

 

 

 

Assembly

Crossbar (93). Discard the two Screws.

 

 

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

93

 

 

9. IMPORTANT: To avoid damaging the

9

 

 

 

 

 

Crossbar (93), do not use power tools and

 

 

 

9

112

 

 

 

 

do not overtighten the #10 x 3/4" Screws (9)

 

 

 

 

 

35

or the #10 x 3/4" Flat Head Screws (112).

 

 

 

 

93

87

Orient the Crossbar (93) as shown. Attach the

 

359

112

 

 

 

 

 

 

 

 

Crossbar to the Handrails (87, 88) with two #10

 

 

 

 

 

x 3/4" Flat Head Screws (112), two #10 x 3/4"

 

 

 

 

 

 

Screws (9), and two 1/4" Star Washers (35) as

 

 

 

 

 

 

shown. Start all four Screws, and then tighten

 

 

 

 

88

 

them.

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

Page 10
Image 10
ProForm 795 user manual Shown. Start all four Screws, and then tighten Them