Manuals / ProForm / Fitness & Sports / Treadmill

ProForm 795 user manual Then, press the Incline increase button once, Console, Assembly

Models: 795

1 36

Download 36 pages 43.52 Kb

Page 13

Then, press the Incline increase button once.

15.Attach the Left Tray (107) and the Right Tray (108) to the console assembly with four #8 x 1/2" Screws (1).

16.IMPORTANT: See page 15 and plug in the power cord. Next, see page 17 and turn on the power.

Then, press the Incline increase button once.

When the frame stops moving, remove the key from the console and unplug the power cord.

15
108		107
		107
1
	Console
1	Assembly	1
1		1
16

IMPORTANT:

Make sure to follow

all instructions in

this step

13

Image 13

ProForm 795 Then, press the Incline increase button once, Make sure to follow all instructions in this step, Console

Contents

Model No. PFTL79611.0 Serial No QUESTIONS?CONTACT THE STORE please contact Customer Care CALL TOLL-FREEWARNING DECAL PLACEMENT TABLE OF CONTENTS3. Use the treadmill only as described IMPORTANT PRECAUTIONS9. Never allow more than one person on the treadmill at a time should be on the same circuit. Do not use an extension cord23. Never insert any object into any opening on the treadmill SAVE THESE INSTRUCTIONS24. Inspect and properly tighten all parts of the treadmill regularly BEFORE YOU BEGIN PART IDENTIFICATION CHART 1. Make sure that the power cord is unplugged ASSEMBLYAttach the Right Wheel Cap not shown to the right side of the Base 94 in the same94. Be careful not to pinch the Upright Wire See the inset drawing. Tie the wire tie in thefully tighten the Screws yet Attach the Right Upright not shown in theBase Covers into place yet Do not fully tighten the Screws and Bolt yet Crossbar 93, do not use power tools andAttach the Right Handrail 87 in the same 9. IMPORTANT To avoid damaging theScrews, and then tighten them Page Make sure to follow all instructions in this step Then, press the Incline increase button onceAssembly ConsoleFrame until this step is completed HOW TO PLUG IN THE POWER CORD OPERATION AND ADJUSTMENTFEATURES OF THE CONSOLE CONSOLE DIAGRAMHOW TO USE THE MANUAL MODE 1. Insert the key into the console HOW TO TURN ON THE POWER2. Select the manual mode 3. Start the walking belt5. Follow your progress with the displays The matrix-When 4. Change the incline of the treadmill as desiredThe Calories/Incline The Time display6. Measure your heart rate if desired 8. When you are finished exercising, remove the key from the console7. Turn on the fan if desired 7. When you are finished exercising, remove the key from the console HOW TO USE AN ONBOARD WORKOUT 1. Insert the key into the console2. Select an onboard workout 3. Start the workout9. When you are finished exercising, remove the key from the console HOW TO USE AN IFIT LIVE WORKOUT1. Insert the key into the console 2. Insert the iFit Live module into the consoleHOW TO USE A PROFORM SYNC If a module is connected, you may also select the following screens THE INFORMATION MODEMake sure that the audio wire is fully plugged in HOW TO USE THE STEREO SOUND SYSTEMHOW TO FOLD THE TREADMILL HOW TO FOLD AND MOVE THE TREADMILLHOW TO MOVE THE TREADMILL HOW TO LOWER THE TREADMILL FOR USESYMPTOM The power does not turn on TROUBLESHOOTINGSYMPTOM The displays of the console do not function properly SYMPTOM The power turns off during useSYMPTOM The walking belt slows when walked on SYMPTOM The incline of the treadmill does not change correctlyTop View SYMPTOM The walking belt is off-center or slips when walked on EXERCISE INTENSITY EXERCISE GUIDELINESWORKOUT GUIDELINES EXERCISE FREQUENCYKey No. Qty PART LISTDescription Key No. QtyDescription Description2 14 EXPLODED DRAWINGModel No. PFTL79611.0 R0811A Model No. PFTL79611.0 R0811A EXPLODED DRAWING B6619 Model No. PFTL79611.0 R0811A EXPLODED DRAWING CModel No. PFTL79611.0 R0811A EXPLODED DRAWING D1022 108 112LIMITED WARRANTY ORDERING REPLACEMENT PARTSICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT