ProForm 831.24645.0 user manual Treadmill until it is completely assembled

2. With the help of a second person, carefully tip	2
the treadmill onto its right side. Do not fully fold
		14
the treadmill until it is completely assembled.			84
Insert the other Extension Leg (89) into the base
of the Uprights (84). Hold an Extension Leg			92
Nut (67) in the bottom of the Extension Leg, and	44
thread a 2.25" Extension Leg Bolt (92) into the			89
top of the Extension Leg. Next, thread a 2.5"
Extension Leg Bolt (65) into the bottom of the
Extension leg. Firmly tighten the Extension
Leg Bolts.		65	67
Slide the other Front Endcap (44) onto the base
of the Uprights (84). Partially tighten a Front
Endcap Screw (14) into the Front Endcap and
the base.
3. Attach two Base Pads (82) to the base of the	3
Uprights (84) with two 1" Tek Screws (83).
	83	82
		84
	83	82
4. With the help of a second person, carefully raise	4
the Uprights (84) to a vertical position.
Insert the Handrails (20) into the tubes at the top
of the Upright (84). Make sure that the Handrails
are turned so that the Handrail Bolts (64) can be
threaded into the Handrails (see the inset draw-	20
ing). Start both Handrail Bolts before tightening
them.
See steps 1 and 2. Fully tighten the two Front			64
			84
Endcap Screws (14).
			20
		20	64
	7