2. Insert the tab on one of the Handrail Brackets (42)

2

 

 

 

into the indicated slot in the right Upright (84).

 

 

 

 

 

 

 

Attach the Handrail Bracket with a Screw (3).

 

 

Slot

 

 

 

 

 

Slide a Handrail Cap (8) onto the lower end of a

 

 

 

8

Handrail (20). Make sure that the Handrail Cap is

 

 

 

3

 

 

 

 

oriented as shown.

 

84

 

 

 

 

 

 

Insert the top of the Handrail (20) into the tube at

 

 

 

42

the top of the right Upright (84), and slide the

 

 

 

Handrail Cap (8) over the Handrail Bracket (42).

 

64

 

3

Attach the top of the Handrail to the right Upright

 

 

 

 

 

 

with two Handrail Bolts (64); start both Handrail

 

 

 

 

Bolts but do not tighten them yet. Then, at-

 

 

 

 

tach the Handrail to the Handrail Bracket with a

 

 

 

20

Screw (3). Tighten the two Handrail Bolts.

 

 

 

 

 

 

 

3. With the help of a second person, carefully tip

3

 

 

 

the treadmill onto its right side. Do not fully fold

 

 

 

 

 

14

 

the treadmill until it is completely assembled.

 

 

84

 

 

 

 

Insert the other Extension Leg (89) into the base

 

 

 

 

of the Uprights (84). Hold an Extension Leg

44

 

 

92

Nut (67) in the bottom of the Extension Leg, and

 

 

thread a 2.25" Extension Leg Bolt (92) into the

 

 

 

89

top of the Extension Leg. Next, thread a 2.5"

 

 

 

 

 

 

 

Extension Leg Bolt (65) into the bottom of the

 

 

 

 

Extension Leg. Firmly tighten the Extension

 

 

 

 

Leg Bolts.

 

 

65

67

 

 

 

 

Slide the other Front Endcap (44) onto the base

 

 

 

 

of the Uprights (84). Partially tighten a Front

 

 

 

 

Endcap Screw (14) into the Front Endcap and

 

 

 

 

the base.

 

 

 

 

4. Attach two Base Pads (82) to the base of the

4

 

 

 

Uprights (84) with two 1" Tek Screws (83).

 

 

 

 

 

 

 

 

83

82

 

 

 

 

 

 

 

 

84

 

 

 

83

82

 

 

 

 

 

 

 

7

 

 

 

Page 7
Image 7
ProForm 831.24646.1 user manual Bolts but do not tighten them yet. Then, at, Treadmill until it is completely assembled