
ASSEMBLY
Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench
and a rubber mallet .
As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page
22.The second number refers to the quantity used in assembly. Note: Some small parts may have been pre- assembled for shipping. If a part is not in the parts bag, check to see if it has been
Note: If a part is not in the parts bag, first check to see if it has been
call |
|
|
| |
M6 Flat | M8 Nylon | M10 Zinc Split | M10 Black Nylon | M10 Zinc Nylon |
Washer | Locknut | Washer | Locknut | Locknut |
1/2” Nylon | M4 x 16mm | M4 x 22mm | M6 x 16mm | M6 x 25.4mm Button |
Locknut | Screw | Screw | Screw | Screw |
M6 x 50mm Screw | M8 x 14mm Button | M8 x 39mm Button | ||
|
| Screw |
| Bolt |
M8 x 12mm Button | M10 x 52mm Zinc Button | M10 x 45mm Button | ||
Screw |
| Bolt |
| Screw |
|
| M10 x 112mm Carriage Bolt |
| |
|
| 1/2” x 70mm Button Bolt |
| |
|
| 4 |
|
|