ASSEMBLY

Assembly requires two persons.

Place all parts of the elliptical crosstrainer in a cleared area and remove the

 

packing materials. Do not dispose of the packing materials until assembly is completed.

In

addition to the

included allen wrenches, assembly requires a phillips screwdriver

, an

adjustable

wrench

,and a rubber mallet

.

 

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.

 

The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on

 

page 14. The second number refers to the quantity used in assembly.

Note: Some small parts may have been

pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Nylon

M10 Nylon

M10 Split

Handlebar

M10

Locknut (38)–4

Locknut (33)–6

Washer (45)–2

Washer (55)–2

Washer (29)–2

Console

 

 

 

 

Screw (59)–4

M8 x 19mm Button

M10 x 27mm

M10 x 27mm

Spring Bracket

 

Screw (56)–2

Patch Screw (40)–2

Carriage Bolt (27)–2

 

Washer (35)–2

 

 

 

 

M8 x 45mm Button Bolt (50)–4

 

M10 Bolt Set (25)–2

 

M10 x 74mm Bolt (7)–2

 

M10 x 75mm Carriage Bolt (34)–4

1.Identify the Front Stabilizer (10), which has round Endcaps (21) on it. While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M10 x 75mm Carriage Bolts (34) and two M10 Nylon Locknuts (33).

1

 

34

 

 

1

34

 

10

33

21

 

5

Page 5
Image 5
ProForm 831.285370 user manual Assembly, Wrench A rubber mallet