THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown:
The Distance/Incline display will show the total number of miles (or kilometers) that the walking belt has moved.
The Time/Pace display will show the total number of hours the treadmill has been used.
An “E” for English miles or an “M” for metric kilometers will appear in the Speed dis- play. Press the Speed ▲ but- ton to change the unit of measurement.
IMPORTANT: The
Calories/Pulse display
should be blank. If a “d” ap- pears in the display, the con- sole is in the “demo” mode.
This mode is intended to be
used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although
the buttons on the console will not operate. | If a “d” ap- |
pears in the Calories/Pulse display when the infor- |
|
mation mode is selected, press the Speed | ▼ button |
so the display is blank. |
|
To exit the information mode, remove the key from the |
|
console. |
|
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor provides
rate programs to be used. To purchase the optional chest pulse sensor, call
HOW TO LEVEL THE TREADMILL
If the treadmill wheels are touching the floor or if the treadmill rocks slightly, turn one or both of the leveling feet under the upright base until the wheels are off the floor and the rocking motion is eliminated. Note: If nec- essary, tip the treadmill and use a phillips screwdriver to turn the leveling feet.
Leveling |
Feet |
Wheels |
20
