ProForm 831.295062 user manual Assembly, Make sure that the power cord is unplugged

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches		and your own phillips screwdriver
and wire cutters	.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 26 and 27. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. If a part is missing, call toll-free1-888-533-1333.

Extension Leg Bolt (96)–4 1” Tek Screw (80)–2 Latch Screw (79)–2

1/4” Washer	Upright Bolt (76)–4
	Internal Star
(39)–4	Washer (77)–4

1. Make sure that the power cord is unplugged.	1
With the help of a second person, carefully raise the
Uprights (97) to the position shown. Insert one of the
Extension Legs (92) into the right Upright. (Note: It may
be helpful to tip the Uprights forward as you insert the
Extension Leg.) Make sure that the Caution Decal (91) is
in the indicated location.
Insert the other Extension Leg (not shown) in the same
way.
	91
	97
	92

5