ProForm DRTL99720 How To Use Programs Directly From Our Internet Site, select a program, When

HOW TO USE PROGRAMS DIRECTLY FROM

OUR INTERNET SITE

Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details.

To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 14. In addition, you must have an internet connection and an internet service provider. A list of specific system requirements will be found on our Web site.

Follow the steps below to use a program from our

Web site.

1 Insert the key into the console.

See HOW TO TURN ON THE POWER on page 10.

2	Select the iFIT.com mode.
	When the key is in-
	serted, the manual
	mode will be selected
	and the Manual indica-
	tor will light. To use a
	program from our inter-
	net site, press the Program button repeatedly until
	the iFIT.com indicator lights.

Go to your computer and start an internet

3 connection.

Start your web browser, if necessary, and go to

4 our internet site at www.iFIT.com.

5	Follow the desired links on our internet site to
	select a program.
	Read and follow the on-line instructions for using a
	program.
	Follow the on-line instructions to start the
6
	program.

When you start the program, an on-screen count- down will begin.

7	Return to the treadmill and stand on the foot
	rails. Find the clip attached to the key and slide
	the clip onto the waistband of your clothes.
	When the on-screen countdown ends, the program
	will begin and the walking belt will begin to move.
	Hold the handrails, step onto the walking belt, and
	begin walking. During the program, an ele		ctronic
	“chirping” sound will alert you when the speed
	and/or incline of the treadmill is about to change.
	CAUTION:	Always listen for the “chirp” and be
	prepared for speed	and/or incline changes.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on

the console. However, when the next “chirp” is heard, the speed and/or incline will change to

the next settings of the program.

To stop the walking belt at any time, press the

Stop button on the console. The Time/Segment

Time display will begin to flash. To restart the pro-

gram, press the Start button or the Speed			▲ but-
ton. After a moment, the walking belt will begin to
move at 1.0 mph.	When	the next “chirp” is
heard, the speed and incline will change to the
next settings of the program			.

When the program is completed, the walking belt

will stop and the Time/Segm ent Time display will begin to flash. Note: To use another program,

press the Stop button and go to step 5.

Note: If the speed or incline of the treadmill does not change when a “chirp” is heard, make sure that the iFIT.com indicator is lit and that the Time/Segment Time display is not flashing. In addition, make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.

Follow your progress with the LED track and

8 the displays.

See step 5 on page 10.

9 When the program has ended, remove the key.

See step 6 on page 12.

17