ProForm DTL32940 user manual Problem The walking belt slows when walked on

Models: DTL32940

1 22
Download 22 pages 32.14 Kb
Page 17
Image 17

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10.

b.If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

2”–3”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, call our Customer Service Department toll-free.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b.If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each side of the walk- ing belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

PROBLEM: ONE OF THE UPPER BODY ARMS SQUEAKS DURING USE

SOLUTION: a. Correcting this problem requires a small amount of white marine grease, available at most hardware stores. Turn the Resistance Knob (109) counterclock- wise until it can be removed. Remove the Resistance Cone (108) and the Upper Body Arm (117), along with the 3/8” Washers (5), Spring Washer (111), Thrust Washers (112), and Thrust Bearing (113). (Note: If the Resistance Sleeve [107] or Resistance Plate [27] comes out of the Resistance Bracket [105] or Resistance Cone, press it back in.) Apply a thin layer of white marine grease to the outer surface of the Resistance Cone (108). Reattach all parts in the order shown at the right.

a

 

105

24

107

 

 

112

108

111

109

 

27

 

113

 

5

17

Page 17
Image 17
ProForm DTL32940 Problem The walking belt slows when walked on, Problem ONE of the Upper Body Arms Squeaks During USE

DTL32940 specifications

The ProForm DTL32940 treadmill is designed to elevate your fitness routine with its blend of advanced features and user-friendly technology. Tailored for both beginners and seasoned athletes, this treadmill stands out in a crowded market by offering functionality, comfort, and versatility.

One of the standout features of the ProForm DTL32940 is its powerful motor. Equipped with a robust 2.0 CHP motor, this treadmill provides a smooth and consistent performance, capable of supporting various workout intensities. Users can adjust their running speed up to 10 miles per hour, allowing for both challenging sprints and comfortable walks. This speed range is perfect for interval training, permitting users to seamlessly switch between quick bursts of speed and recovery phases.

The DTL32940 also boasts a spacious running surface. With a generous 20" x 55" belt, users have ample room to stride comfortably, reducing the risk of injury while enhancing performance. The treadmill also features a cushioned deck, designed to minimize impact on joints, making it suitable for individuals of all fitness levels.

Another key characteristic of this treadmill is its foldable design. The ProForm DTL32940 incorporates a space-saving, EasyLift Assist mechanism, which allows users to effortlessly fold and store the treadmill when not in use. This is an excellent feature for those with limited space at home.

The integrated technology is yet another appealing aspect of the ProForm DTL32940. It includes a 5-inch display console that tracks essential workout metrics such as speed, distance, time, and calories burned. Additionally, the treadmill features 18 built-in workout programs designed by certified personal trainers. These programs cater to different fitness goals, from weight loss to endurance training, ensuring that users can find an engaging workout.

Moreover, the ProForm DTL32940 is compatible with iFit, a subscription-based personal training service that offers a vast library of global workouts, interactive training sessions, and the ability to track progress over time. This integration allows for a more dynamic and customized fitness experience.

In summary, the ProForm DTL32940 treadmill combines a powerful motor, a spacious running surface, space-saving design, and advanced technology to deliver an exceptional workout experience. Whether you are aiming to shed pounds, build endurance, or maintain fitness, this treadmill provides the tools and features necessary to help users achieve their goals.