ProForm DVDR3570H user manual Connecting to a camcorder, Option 1 Using the DV in socket

Step 2: Optional Connections (continued)

Option 1

Connecting to a camcorder

You can use the front sockets to copy camcorder recordings. These sockets are located behind the flap on the right hand side which provides convenient connections.

Option 1: Using the DV IN socket

Use this connection if you have a Digital Video or Digital 8 camcorder. The DV socket conforms to the i.LINK standard. It provides the best picture quality.

A Connect an i.LINK 4-pin cable (not supplied) from the DV IN socket on the recorder to the appropriate DV OUT socket on the camcorder.

B Press CAM on the remote control to select ‘CAM2’.

Helpful Hint:

–It is not possible to record from this recorder to your camcorder via the DV IN socket on your recorder.

English

Option 2

Option 2: Using the VIDEO In socket

Use the VIDEO connection if your camcorder has only a single video output (Composite Video, CVBS). It provides good picture quality.

A Connect the VIDEO socket at the front panel of the recorder to the corresponding S-VHS or Video output socket on the camcorder.

B Connect the audio cable (red/white - not supplied) from the AUDIO L/R sockets at the front panel of the recorder to the audio output socket on the camcorder.

C Press CAM on the remote control followed by P +/- repeatedly to select ‘CAM1’.

Helpful Hint:

–If you connect your camcorder to the scart socket at the rear of this recorder, select

{ EXT1 } or { EXT2 } as the input source.

23