HP LE1911 19-inch manual Rear Components, Connecting the Cables

Rear Components

Figure 3-2Rear Components

Component		Function
1	AC Power Connector	Connects the AC power cord to the monitor.
2	VGA Connector	Connects the VGA cable to the monitor.

Connecting the Cables

1.Place the monitor in a convenient, well-ventilated location near the computer.

NOTE: You can route the cables through the cable management feature on the back of the monitor's stand, if desired.

2.Connect one end of the VGA signal cable to the VGA connector on the monitor and connect the other end of the cable to the VGA connector on the computer.

3.Connect one end of the power cable to the AC power connector on the monitor and connect the other end of the cable to an electrical wall outlet.

Figure 3-3Connecting the Cables

6 Chapter 3 Setting Up the Monitor