13. Attach the ground wire on the Upright Wire (28)

13

 

to the indicated hole in the Base (48) with a

 

2

36

Silver Ground Screw (27).

 

 

Press the indicated grommet into the Right

Grommet

 

Upright (36).

 

 

 

Slide the Right Base Leg Cover (102) onto the

 

28

Base (48) as shown. Attach the Right Base Leg

 

Ground Wire

Cover with three 3/4" Screws (2). Be careful not

 

 

 

to pinch the Upright Wire (28). Do not over-

 

27

tighten the Screws.

 

 

2

 

 

48

 

 

102

 

 

2

14. Slide the Left Base Leg Cover (101) onto the

14

2

Base (48) as shown. Attach the Left Base Leg

 

Cover with three 3/4" Screws (2). Be careful not

 

 

to overtighten the Screws.

 

 

 

 

2

 

 

48

 

 

101

 

 

2

15. Tighten a 3/4" Screw (2) into each side of the

15

 

Base (48) and each Base Leg Cover (101, 102).

 

 

 

Be careful not to overtighten the Screws.

 

 

 

 

48

 

 

2

 

101

102

 

12

 

Page 12
Image 12
ProForm PATL30706.0 user manual To overtighten the Screws, Be careful not to overtighten the Screws