ProForm PATL40907.0 Be careful not to pinch the Upright Wire, Fully tighten the Bolts yet

5. Set the Right Upright Spacer (79) on the Base	5
(83). Be careful not to pinch the Upright Wire
				6
(38). With the help of a second person, hold a
Bolt Spacer (80) inside the lower end of the			78
Right Upright (78). Insert a 3/8" x 4" Bolt (6) with
a 3/8" Star Washer (9) into the Right Upright			79	9
and the Bolt Spacer. Repeat this step with a
				38
second Bolt Spacer (80), 3/8" x 4" Bolt (6),
and 3/8" Star Washer (9). Set the Right Upright					77
in the Right Upright Spacer.
Finger tighten the 3/8" x 4" Bolts (6); do not				83	80
fully tighten the Bolts yet.
Press a Base Endcap (77) into the Base (83).
6. With the help of a second person, carefully tip	6
the treadmill onto its right side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Attach a Base Pad (81) to the Base (83) in the	81			56
location shown with a #8 x 1" Tek Screw (2) and
a Base Pad Spacer (13). Then, attach another	2				4
Base Pad (81) with only a #8 x 1" Tek Screw (2).
Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and		83
a 3/8" Nut (8) that you removed in step 1. Do				81
not overtighten the Nut; the Wheel must turn				13	84
freely.
				2	8
7. Set the Left Upright Spacer (76) on the Base	7		6
(83). With the help of a second person, hold a
Bolt Spacer (80) inside the lower end of the Left
Upright (74). Insert a 3/8" x 4" Bolt (6) with a				74
3/8" Star Washer (9) into the Left Upright and
the Bolt Spacer. Repeat this step with a sec-
ond Bolt Spacer (80), 3/8" x 4" Bolt (6), and			9
3/8" Star Washer (9). Set the Left Upright in the		77		76
Left Upright Spacer.
Finger tighten the 3/8" x 4" Bolts (6); do not
fully tighten the Bolts yet.		80
Press a Base Endcap (77) into the Base (83).			83
With the help of a second person, tip the tread-
mill so that the Base (83) is flat on the floor.
	8