ProForm PATL40907.0 Do not fully fold the Frame yet, See the inset drawing. Tie the long tie

2.	With the help of a second person, carefully tip	2
	the treadmill onto its left side. Partially fold the
	Frame (56) so that the treadmill is more stable;
	do not fully fold the Frame yet.
				38	Hole
	Cut the tie securing the Upright Wire (38) to the				83
	Base (83). Locate the tie in the indicated hole in		Tie
	the Base, and use the tie to pull the Upright Wire				81
	out of the hole.
	Attach a Base Pad (81) to the Base (83) in the				2
	location shown with a Base Pad Spacer (13) and
	a #8 x 1" Tek Screw (2). Then, attach another
	Base Pad (81) with only a #8 x 1" Tek Screw (2).
		56	13	81
				2
3. Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and		3
	a 3/8" Nut (8) that you removed in step 1. Do
	not overtighten the Nut; the Wheel must turn
	freely.
				83
			4
			8	84
4. Identify the Right Upright (78) and the Right		4
	Upright Spacer (79), which are marked with
		38
	stickers. Insert the Upright Wire (38) through the
	Right Upright Spacer as shown.				78
	See the inset drawing. Tie the long tie in the		Long Tie		38
	Right Upright (78) securely around the end of
					79
	the Upright Wire (38). With the help of a second
					83
	person, hold the Right Upright near the Base
	(83). Then, pull the other end of the long tie until
	the Upright Wire is routed completely through
	the Right Upright.
			78
		38	Long
			Tie
		7