8. Remove the plastic ties from the Right Handrail

8

 

 

 

 

(33) and the Left Handrail (not shown). If neces-

 

 

 

 

sary, press the Cage Nuts (105) back into place.

 

 

 

 

 

With the help of a second person, hold the

 

 

 

 

 

Console (91) near the Right Upright (54).

 

 

 

 

 

Connect the Wire Harness (39) to the console

 

 

 

 

 

wire. See the inset drawing. The connectors

 

 

 

 

 

should slide together easily and snap into

 

 

 

 

 

place. If they do not, turn one connector and try

 

 

 

 

 

again. IF THE CONNECTORS ARE NOT CON-

 

 

 

 

 

NECTED PROPERLY, THE CONSOLE MAY

Plastic

 

91

 

BE DAMAGED WHEN THE POWER IS

 

 

TURNED ON.

Tie

 

33

Console

 

Next, remove the wire tie from the Wire Harness

105

 

 

(39). Then, insert the connectors and the excess

39

 

Console

Wire

 

wire downward into the Right Upright (54).

 

Wire

 

 

 

54

 

Wire

39

 

 

 

Tie

 

9. Start all six M8 x 15mm Bolts (8) with six M8

9

 

 

 

 

Star Washers (5) into the Uprights (53, 54).

 

 

 

 

Then, firmly tighten all six Bolts.

 

8

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

5

8

5 8

 

 

53

 

5

 

 

 

 

54

 

 

10

 

 

 

 

Page 10
Image 10
ProForm PATL49708.0 user manual Again. if the Connectors are not CON, Nected PROPERLY, the Console MAY