ProForm PFB38030 WARNING:

Weight

ATTACHING WEIGHTS TO THE LEG LEVER

To use the Leg Lever (4), slide the desired weights

(not included) onto the Weight Tube (11). Secure the

weights with a Weight Clip (83 or 84 [not shown]).

Weights can be added to the Curl Bar (not shown) in

the same manner. Secure the weights to the Curl Bar

with two Weight Clips (83 or 84 [not shown]).

WARNING: Do not place more

than 150 pounds on the Weight Tube (11) or the

Curl Bar (47).

USING THE OLYMPIC WEIGHT ADAPTER

Press a 48mm Round Inner Cap (16) into the Olympic

Adapter (15). Attach the Olympic Adapter to the

Weight Tube (11) with a 1/4” x 9.5mm Allen Head Set

Screw (66). Make sure that the Set Screw is in the

bottom of the Adapter.

Press a 48mm Round Inner Cap (16) into a Weight

Adapter (49). Attach the Weight Adapter to the Curl

Bar (47) with a 1/4” x 9.5mm Allen Head Set Screw

(66). Make sure that the Set Screw is in the bot-

tom of the Adapter. Attach the other Weight

Adapter to the Curl Bar in the same manner.

USING THE BENCH FOR PRESS EXERCISES

Toprevent the weight rack from tipping while perform-

ing press exercises on the bench, set the “L”-bracket

(76) over the Center Base (27).