1.

To make assembly easier,read the

1

 

 

 

 

 

information on page 5 before you begin.

 

 

 

 

 

 

Attach a Base (2) to the Frame (1) with four M8

 

 

29

 

1

 

x 15mm Button Screws (29) and four M8

 

 

 

 

 

Washers (34). Tip: Start all the Button

 

 

 

 

 

 

Screws before tightening any of them.

 

34

 

 

 

 

Then, attach a Frame Foot (11) to the underside

 

 

 

 

 

of the Frame (1) with an M4 x 16mm Screw (31)

 

 

 

 

 

 

and an M4 Washer (48).

2

34

 

 

29

 

Attach the other Base (not shown) and the

 

 

 

other Frame Foot (not shown) in the same

 

11

 

48

 

way.

 

 

 

31

2. Insert the Upright (4) into the Frame (1).

2

 

 

 

 

 

Attach the Upright (4) with three M8 x 15mm

 

 

 

 

 

 

Button Screws (29) and three M8 Washers (34).

 

 

 

 

 

 

Do not tighten the Button Screws yet.

 

 

 

 

4

 

Finish attaching the Upright (4) with an M8 x

 

 

 

 

 

52mm Button Bolt (47), two M8 Washers (34),

 

29

 

 

47

 

and an M8 Locknut (46).

 

34

 

 

Firmly tighten the three M8 x 15mm Button

 

 

 

34

 

Screws (29) and the M8 Locknut (46).

 

34

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

34

 

 

 

 

46

 

 

6

 

 

 

 

Page 6
Image 6
ProForm PFBE19610.3 user manual Do not tighten the Button Screws yet