ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
To hire an authorized service technician to assemble the exercise bench, call
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
The included hex key(s) 
, and the following tools (not included) may be required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Clear tape or masking tape, and soapy water.
Assembly will be more convenient if you have a socket set, a set of
1. | 1 | |
Before beginning assembly, make sure you | ||
understand the information in the box |
| |
above. For help identifying small parts, use | 64 | |
the PART IDENTIFICATION CHART in the | ||
| ||
center of this manual. | 3 | |
| ||
Attach the Front Stabilizer (3) to the Base (1) with | 64 | |
two M10 x 78mm Carriage Bolts (50) and two | 1 | |
M10 Nylon Locknuts (64). Do not tighten the |
| |
Locknuts yet. | 50 | |
2. Attach the Rear Stabilizer (2) to the Base (1) with | 2 | |
two M10 x 78mm Carriage Bolts (50) and two | ||
| ||
M10 Nylon Locknuts (64). | 50 | |
Tighten the M10 Nylon Locknuts (64) used in |
| |
steps 1 and 2. |
| |
| 2 | |
| 1 | |
| 64 |
5
