Resistance
Knob

HOW TO USE THE ELLIPTICAL TRAINER

HOW TO EXERCISE ON THE ELLIPTICAL TRAINER

To mount the elliptical trainer, firmly hold the handle- bars and carefully step onto the pedal that is in the lowest position. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedal disks can turn in either direction. It is recommended that you turn the pedal disks in the direction shown below; howev- er, to give variety to your exercise, you may choose to turn the pedal disks in the opposite direction.

Pedal

Disk

Pedal

To dismount the elliptical trainer, allow the pedals to come to a complete stop. CAUTION: The elliptical trainer does not have a free wheel; the pedals will continue to move until the flywheel stops. When the pedals are stationary, step off the highest pedal first. Then, step off the lowest pedal.

HOW TO ADJUST THE RESISTANCE OF THE PEDALS

As you exercise, you can adjust the resistance of the pedals with the resistance knob on the console. To increase the resistance, turn the knob clockwise; to

decrease the resistance, turn the knob counterclock- wise. Important: The knob may not stop turning when maximum or minimum resistance is reached. When the knob becomes more difficult to turn, stop turning it or damage will result.

DESCRIPTION OF THE CONSOLE

The innovative console offers a manual mode

and three moti- vational pacer programs. Each pacer program is

designed to guide you through an

effective work- out by pacing

your exercise. As you exercise, six monitor modes will provide continuous exercise feedback. The monitor modes are described below:

Speed—This mode shows your pedaling pace, in miles per hour or kilometers per hour.

Time—If you select the manual mode, this mode will show the elapsed time. If you select one of the three pacer programs, this mode will show the time remain- ing in the program.

Distance—This mode shows the distance you have pedaled, in miles or kilometers.

Fat Calories (FAT CALS)—This mode shows the approximate number of fat calories you have burned (see BURNING FAT on page 13).

Calories (CALS)—This mode shows the approximate number of calories you have burned.

Scan—This mode displays the Speed, Time, Distance, Fat Calories, and Calories modes, for five seconds each, in a repeating cycle.

HOW TO SELECT MILES OR KILOMETERS

When the letters KPH appear in the display, the con- sole will display speed and distance in kilometers. When the letters KPH do not appear, the console will display speed and distance in miles. To change the unit of measurement, first press the on/reset button. Next, hold down the program and display buttons for several seconds until the letters KPH appear or disap- pear.

9

Page 9
Image 9
ProForm PFEL19011 HOW to USE the Elliptical Trainer, HOW to Exercise on the Elliptical Trainer, Description of the Console