ProForm PFEL39032 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.

Frame Spacer (83)–1	M10 Split	Wave Washer	M8.5		M10
	Washer (70)–3	(95)–2	Washer (53)–2		Washer (38)–6
M4 x 16mm	M4 x 22mm	M8 Nylon			M10 Nylon
Screw (66)–4	Screw (93)–2	Locknut (46)–4			Locknut (29)–6
M8 x 45mm Button Bolt (50)–4		M8 x 25mm Patch		M10 x 35mm Carriage
		Screw (22)–2			Bolt (20)–2
	M10 x 112mm Carriage Bolt (34)–4
	M10 x 88mm Button Screw (63)–1
	M10 x 78mm Button Bolt (27)–2
		5