10.Attach a Right Rear Pivot Cover (72) and a Right Front Pivot Cover (73) around the right Handlebar
(6) and the Right Handlebar Leg (71) with six M4 x 1/2" Screws (49).
Repeat this step for the left Handlebar (6) and the Left Handlebar Leg (5).
10
6
6 
49
73
49
49
72 
49 
5
71
11.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
8
