8. Turn the Seat Knob (11) counterclockwise and remove | 8 |
|
it. Next, insert the Seat Post (5) into the Seat Frame |
| |
|
| |
(28). Press the Seat Post Endcap (54) into the lower |
|
|
end of the Seat Post. |
|
|
Next, align one of the adjustment holes in the Seat | 5 |
|
Post (5) with the indicated hole in the Seat Frame (28). |
|
|
Insert the Seat Knob (11) into the Seat Frame and the |
| Adjustment |
Seat Post, and turn the Seat Knob clockwise until it is |
| |
tight. Make sure that the Seat Knob is inserted |
| Holes |
through one of the adjustment holes in the Seat | 28 |
|
Post. |
| |
| 11 | |
|
| |
|
| Hole |
| 54 |
|
9. Attach the Seat (12) to the Seat Post (5) with four M8 | 9 |
|
Nylon Locknuts (10) and four M8 Split Washers (41). |
| |
|
| |
Note: The Nylon Locknuts and the Split Washers may |
|
|
be preattached to the underside of the Seat. | 12 |
|
|
| |
|
| 5 |
|
| 41 |
| 41 | 10 |
|
| |
| 10 |
|
10. Identify the Left Pedal (24), which is marked with an | 10 |
|
“L.” Using an adjustable wrench, firmly tighten the |
| |
|
| |
Left Pedal counterclockwise into the left arm of the |
|
|
Crank (21). Tighten the Right Pedal (not shown) |
|
|
clockwise into the right arm of the Crank. Important: | 21 |
|
Tighten both Pedals as firmly as possible. After |
|
|
using the exercise cycle for one week, retighten |
|
|
the Pedals. For best performance, the Pedals must |
|
|
be kept tightened. |
|
|
Adjust the Left Pedal Strap (25) to the desired posi- | 25 |
|
tion, and press the end of the Pedal Strap onto the |
|
|
tab on the Left Pedal (24). Adjust the Right Pedal | 24 |
|
Strap (not shown) in the same way. |
| |
| Tab |
|
11.Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
8
