3.While another person holds the Upright (13) in the position shown, connect the Upper Wire Harness (36) to the Lower Wire Harness (55).
Carefully pull the excess Upper Wire Harness (36) out of the top of the Upright (13), and slide the Upright onto the Frame (1). Be careful to avoid pinching the Wire Harnesses. Next, attach the Upright with three M8 x 25mm Button Screws (45) and three M8 Split Washers (41).
4.Attach the Handlebar (15) to the Upright (13) with two M8 x 38mm Button Screws (9).
3 |
|
|
| Be careful to avoid | |
| pinching the wire | |
| harnesses while | |
|
| attaching the |
|
| upright. |
| 13 |
|
| 41 | 45 |
|
| |
| 41 |
|
45 | 36 |
|
55 |
| |
|
| |
| 1 |
|
4 |
|
|
|
| 15 |
|
| 9 |
| 13 |
|
6
