ASSEMBLY

Assembly requires two persons.

Place all parts of the exercise cycle in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

Assembly can be completed using the included tools; however, a rubber mallet

is also

recommended.

 

Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the

quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Nylon

M8 Nylon

M10 Nylon

M8 Split

M8 Flat

M10 Split

Locknut (56)–4

Locknut (66)–6

Locknut (64)–4

Washer (81)–4

Washer (73)–4

Washer (54)–12

M4 x 12mm

M6 x 38mm Button

M10 x 17mm Button

M10 x 22mm Button

Screw (77)–2

Bolt (57)–4

Screw (55)–3

Screw (80)–9

M8 x 77mm Button Bolt (58)–2

M10 x 75mm Carriage Bolt (65)–4

1.Attach one of the Stabilizers (19) to the front of the Frame (1) with two M10 x 75mm Carriage Bolts (65) and two M10 Nylon Locknuts (64).

1

 

65

19

 

1

 

64

5

Page 5
Image 5
ProForm PFEX25122 user manual Assembly requires two persons, Recommended