ProForm PFEX97573 user manual HOW to USE the Exercise Cycle

Models: PFEX97573

1 8
Download 8 pages 5.69 Kb
Page 8
Image 8
Target
Pace
Actual
Pace

HOW TO USE THE EXERCISE CYCLE

DIAGRAM OF THE CONSOLE

HOW TO ADJUST THE POSITION OF THE SEAT FRAME

The Seat Frame (3) can be adjusted to the position that is the most comfortable for you. To adjust the Seat Frame, first loosen the Lock Knob (68) on the right side of the Frame (1). Slide the Seat Frame for- ward or backward to the desired position. Tighten the Lock Knob.

1

68

HOW TO ADJUST THE PEDAL STRAPS

To adjust the Left Pedal Strap (27), first pull the end of the Pedal Strap off the adjustment tab on the Left Pedal (45). Align a different hole in the Pedal Strap with the adjustment tab. Press the Pedal Strap onto the adjustment tab. Adjust the Right Pedal Strap in the same manner.

27

Note: If there is athin sheetofclearplastic on the faceoftheconsole, removeit.

3

Adjustment Tab

45

HOW TO ADJUST THE PEDALING RESISTANCE

The pedaling

 

resistance can

8

be adjusted

 

with the

9

Resistance

 

Knob (9) locat-

 

ed on the

 

Console (8). To

 

increase the

 

resistance, turn

 

the Resistance Knob clockwise; to decrease the resis- tance, turn the Resistance Knob counterclockwise.

DESCRIPTION OF THE CONSOLE

The innovative console offers a manual mode and three pacer programs. The pacer programs are designed to help you achieve your exercise goals by pacing your exercise. The programs include an 18 MPH/90 RPM program, a 12 MPH/60 RPM program, and a 6 MPH/30 RPM program. The console also fea- tures five monitor modes that provide continuous exer- cise feedback. Note: On some consoles the pro- grams are listed in MPH and on others in RPM. Both sets of programs are identical.

HOW THE PACER PROGRAMS OPERATE

When you use a pacer program, an indicator will light on each track of

the P.A.C.E.R. display. The outer track shows a tar- get pace; the inner track will show

your actual pace. The target pace

will change periodically during the 18 MPH/90 RPM and 12 MPH/60 RPM programs; as the target pace changes, simply adjust your pace to keep both indica-

tors even. Important: The target pace is a goal pace. Your actual pace may be slower than the tar- get pace, especially during the first few months of your exercise program. Be sure to exercise at a pace that is comfortable for you.

The graphs on the left side of the console show how the target pace will change during each program (see the drawing above). Each graph is divided into ten columns, and each column represents 1/10 of a mile. The bars in each column show what the target pace will be during that 1/10 of a mile. For example, in the first column of the 12 MPH/60 RPM graph, there is one bar. This shows that during the first 1/10 of a mile in this program, the target pace will be 6 MPH (30 RPM). In the second column, there are two bars, indi- cating that the pace is now 12 MPH (60 RPM).

DESCRIPTION OF THE MONITOR MODES

The five monitor modes provide continuous exercise feedback. The modes are described below.

¥SpeedÑThis mode shows your pace, in miles per hour.

¥TimeÑThis mode counts the length of time you have exercised. Note: If you stop exercising for ten seconds or longer, the time mode will pause.

8

9

Page 8
Image 8
ProForm PFEX97573 user manual HOW to USE the Exercise Cycle