ProForm PFSB73930 user manual Maintenance

Maintenance

The hydrotherapy spa is designed to provide years of enjoyment. Please follow the guidelines below to properly maintain your spa.

MAINTENANCE SCHEDULE

Daily

•Check the water level and refill the spa to the level shown in step 5 on page 9.

•Check the pH balance and sanitizer level. Make adjustments if necessary (see WATER CHEM- ISTRY on page 16).

Weekly

• Clean the spa shell at the waterline.

• Check and thoroughly clean the filter (see CHECK-

MAINTAINING THE SPA COVER

The spa cover should be cleaned monthly. To clean the spa cover, use water and a non-abrasive cleaner on the entire cover. Rinse the cover with a garden hose to remove any cleaner residue. Dry the cover entirely. Use a non-silicone-based vinyl conditioner on the cover after you clean it. This will help protect the cover from sun damage.

CHECKING AND CLEANING THE FILTER

The filter should be checked periodically for build-up of dirt and oil. If the filter needs to be cleaned, follow the steps below:

ING AND CLEANING THE FILTER on this page).

• Replace the filter if needed (see ORDERING

REPLACEMENT PARTS on the back cover of this

manual).

Monthly

•Clean the spa cover (see MAINTAINING THE SPA COVER on this page).

•Soak the filter for two hours in a trisodium phos- phate (TSP) solution. Rinse the filter in clean water.

•Replace the filter if needed (see ORDERING REPLACEMENT PARTS on the back cover of this manual).

Every Three Months

•Drain the spa and refill it with clean water. Sanitize and test the pH of the water.

•Check for any leaks around the pump or joints in the pipes. The seals will wear out over time; detect- ing leaks early can reduce repair costs.

•Clean the interior of the spa. Do not use solvents or waxes.

MAINTAINING THE SPA EXTERIOR

The surround is maintenance free. The surround should be cleaned with a mild soap solution; do not use solvents or waxes.

CLEANING THE SPA SHELL

The spa shell should be cleaned with a mild soap solution; do not use solvents or waxes. The spa should always be clean and dry before being moved or stored.

1.Turn off the power.

2.Unscrew the filter cover.

4.Lift the the filter out of the filter housing.

5.Check the filter for dirt and debris. If the filter needs to be cleaned, rinse the fil- ter with a hose. If the filter is still dirty, soak it in cleaning solution from a pool and spa supply store.

6.Inspect the filter for damage. Replace the filter if it is dam- aged.

7.Insert the cleaned or new filter into the fil- ter housing.

8.Re-attach the filter cover.

Filter

Cover

Basket

Diverter

Filter

Plug

Filter

Filter

Housing

15