34.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the Butterfly Upright (1) with a 3/8” x 4 3/4” Bolt (60), a 3/8” Washer (48), and a 3/8” Nylon Jamnut (63).Be sure that the Cable Trap is turned to hold the Cable in place.
35.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley Plates (23) hanging from the Butterfly Cable (73) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place.
36.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63).Be sure that the Cable Trap is turned to hold the Cable in place.
37.Note: For convenience, the weights assembled in step 8 are not shown in the following draw- ings.
Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63).Be sure that the Cable Trap is turned to hold the Cable in place.
15
34 | 1 |
|
|
| |
| 60 |
|
| 24 |
|
| 25 |
|
| 72 | |
| 48 |
|
63 |
|
|
35 | 73 |
|
| 54 |
|
| 23 |
|
| 25 | 50 |
|
| |
| 24 |
|
| 72 |
|
36 |
|
|
| 25 | 57 |
| Bracket |
|
| 24 |
|
| 72 |
|
| 63 |
|
| 4 |
|
37 |
|
|
| 72 |
|
| 25 57 |
|
| 63 |
|
| 24 |
|
| Bracket |
|
| 4 |
|
