17.Attach the upper end of the Storage Latch (65) to the Frame (64) with a 3/8" x 1 3/4" Bolt (7) and a 3/8" Nut (13).
18.Lower the Frame (64) (see HOW TO LOWER THE TREADMILL FOR USE on page 25).
If one of the Rear Leveling Feet (69) doesn’t sit flat on the floor, turn the Rear Leveling Foot until it does, and then tighten the 1/2" Rear Leveling Foot Nut (41) against the Frame (64). Make sure that both 1/2" Rear Leveling Foot Nuts are tightened against the Frame.
17 |
|
64 |
|
13 | 7 |
| 65 |
18 |
|
|
64 | 69 | 41 |
|
|
19.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 27 and 28).
14
