ProForm PFTL13011.0 user manual Screws and Star Washers will be used Step

6.	Remove the four 3/8" x 1" Screws (6) and 3/8"	6				6
	Star Washers (14) from the Handrail Brackets
	(89). Then, remove the Handrail Brackets from					14	89
	the Left and Right Handrails (92, 93). The							6
	Screws and Star Washers will be used in
	step 8.				6			14
								93
					14	89
							6
						14
							92
7. Remove the four 3/8" x 1" Flat Head Screws		7					Hole
	(15) and 3/8" Star Washers (14) from the Left							15
	and Right Uprights (90, 99).					89
	Orient the Handrail Brackets (89) so that the							14
	indicated holes are in the positions shown.
	Insert the Upright Wire (88) through the left
	Handrail Bracket.		Hole
		88
	Attach the Handrail Brackets (89) to the				15
	Uprights (90, 99) with the four 3/8" x 1" Flat
	Head Screws (15) and 3/8" Star Washers (14)				14
	that you just removed. Tighten the Screws.				89			99
				90
8.	Identify the Left and Right Handrails (92, 93).	8						93
	Hold the Left Handrail (92) near the Left Upright
	(90). Insert the Upright Wire (88) into the large					89
	hole in the bottom of the Left Handrail and out of
						14
	the back of the Left Handrail.
	Slide the Left Handrail (92) onto the left Handrail					6
			92
	Bracket (89), and attach the Left Handrail with	88
	two of the 3/8" x 1" Screws (6) and 3/8" Star							14
	Washers (14) that you removed in step 6. Do							6
	not tighten the Screws yet.	14
	Attach the Right Handrail (93) as described							99
	above. Note: There is not a wire in the Right	6	89
	Upright (99).				14
				90	6
		10