SYMPTOM: The walking belt is
a.If the walking belt is
a |
b.If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walk- ing belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.
b |
SYMPTOM: The console display has lines running through it
a.If lines appear in the console display, see THE INFORMATION MODE on page 24 and adjust the contrast level of the display.
28