5.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet.
Remove and discard the two indicated bolts (A) and the shipping bracket (B).
Attach a Wheel (96) to the Base (95) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Do not over- tighten the Nut; the Wheel must turn freely. Press a Base Cap (89) into the Base (95).
6.Align the oval hole in the Left Upright Spacer (88) with the oval hole in the Base (95) as described in step 3.
Hold a Bolt Spacer (14) inside the lower end of the Left Upright (84). Insert a 3/8" x 4 1/4" Patch Bolt (7) with a 3/8" Star Washer (11) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (14), 3/8" x 4 1/4" Patch Bolt (7), and 3/8" Star Washer (11).
Hold the Left Upright Spacer (88) and the Left Upright (84) against the Base (95). Tighten the 3/8" x 4 1/4" Patch Bolts (7) until the heads of the Patch Bolts touch the Left Upright; do not fully tighten the Patch Bolts yet.
With the help of a second person, tip the tread- mill so that the Base (95) is flat on the floor.
5 | B |
|
|
| A |
|
|
| 89 | 8 | 55 |
|
| ||
|
|
| |
| 95 | 96 |
|
|
| 10 |
|
6 | 84 |
7 | |
11 | 88 |
| |
14 |
|
95 |
|
9
