THE INFORMATION MODE
The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. You can also select miles or kilome- ters to measure distance, turn on or turn off the display demo mode, adjust the contrast level of the display, and view the status of the optional iFit Live module. To select the information mode, hold down the Stop button, insert the key into the console, and then re- lease the Stop button. When the information mode is selected, the following information will appear in the display:
The display will show the total number of miles that the walking belt has moved and the total number of hours the treadmill has been used.
The display will show the selected unit of measure- ment. To change the unit of measurement, press the Speed increase button. To view distance in miles, se- lect ENGLISH. To view distance in kilometers, select
METRIC.
The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the “reset” position, and in- sert the key into the console. However, when you re- move the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word “ON” will appear in display while the infor- mation mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.
The display will also show the contrast level of the dis- play. Press the Incline increase and decrease buttons to adjust the contrast.
The display will show whether an accessory is plugged into the console. If the iFit Live module is plugged in, the display will show the words “WIFI STATUS.” If a USB module is plugged in, the display will show the words “USB STATUS.” If nothing is plugged in, the dis- play will show the words “NO MODULE DETECTED.” To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the con- sole. Locate the audio wire and plug it into the audio jack on the side of the console. Then, plug the other end into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Then, adjust the volume on your personal audio player or press the Volume increase and decrease buttons on the con- sole.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
20
