HOW TO USE PERSONAL TRAINER PROGRAMS
1 Insert the key into the console.
See HOW TO TURN ON THE POWER on 10.
2 Select one of the personal trainer programs.
When the key is inserted, the man- ual mode will be selected and the manual indicator will light. To select one of the per-
sonal trainer pro- grams, press the
PROGRAM button repeatedly until one of the four personal trainer program indicators lights.
The profiles on the console show how the speed and incline of the treadmill will change during the personal trainer programs. The numbers beside the profiles show the maximum speed and incline settings for the programs. For example, the upper profile shows that the treadmill will reach a maxi- mum speed of 4.0 mph and a maximum incline of 8% during the first program. The TIME/MIN/MILE display will show how long the selected program will last.
Press the START button or the SPEED ▲ button
3 to start the program.
A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking.
Each program is divided into several time periods of different lengths. One speed setting and one in- cline setting are programmed for each period.
When only three seconds remain in the first period of the program, a series of tones will sound and the treadmill will automatically adjust to the speed and incline settings for the second period.
The program will con- tinue in this way until the TIME/MIN/MILE display counts down to zero. The walking belt will then slow to a stop.
If the speed or incline setting for the current period is too high or too low, you can manually override the settings by pressing the SPEED or INCLINE buttons on the console. However, when the next period begins, the treadmill will adjust to the next speed and incline settings for the program.
To stop the program, press the START/STOP but- ton. The TIME/MIN/MILE display will begin to flash. To restart the program, press the START/ STOP button or the SPEED ▲ button. To end the program, press the STOP button, remove the key, and then reinsert the key.
Follow your progress with the LED track and
4 the four displays.
Refer to step 5 on page 10.
5 Measure your pulse, if desired.
See step 6 on page 11.
When the program is completed, remove the
6 key from the console.
When the program is completed, remove the key from the console. Keep the key in a safe place. Note: If the dis-
plays and indicators
on the console remain lit after the key is re- moved, the console is in the “demo” mode. Refer to page 18 and turn off the demo mode.
When you are finished using the treadmill, move the on/off switch near the power cord to the off position.
12
