3. | Identify the Right Upright (81), which is marked | 3 |
|
|
|
| with a “Right” sticker. Hold the Right Upright |
|
|
| |
| near the Base (91) as shown. |
|
| 81 |
|
| See the inset drawing. Tie the wire tie in the |
|
|
| |
| Right Upright (81) securely around the end of |
|
|
|
|
| the Upright Wire (88). Then, pull the other end | 88 | Wire Tie |
| 88 |
| of the wire tie until the Upright Wire is routed |
| |||
| completely through the Right Upright. |
|
|
| 91 |
|
|
| 81 |
| |
|
|
|
|
| |
|
| 88 | Wire |
|
|
|
| Tie |
|
| |
4. Hold the Right Upright (81) against the Base | 4 |
|
| 7 | |
| (91). Be careful not to pinch the Upright Wire |
|
| ||
| (88). Insert two 3/8" x 4" Bolts (7) and a 3/8" x |
| 81 | 8 |
|
| 1 1/2" Bolt (8) with three 3/8" Star Washers (11) |
|
| ||
| into the Right Upright. |
|
| 11 | 11 |
| Partially tighten the 3/8" x 4" Bolts (7) until the |
|
|
| |
| heads of the Bolts touch the Right Upright (81); |
|
|
| 88 |
| do not fully tighten the Bolts yet. Partially |
|
|
|
|
| tighten the 3/8" x 1 1/2" Bolt (8). |
|
|
| 91 |
|
|
|
|
| |
|
| 8 |
|
|
|
