THE INFORMATION MODE
The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select miles or kilometers to measure distance, and to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown:
The left display will show the total number of hours the treadmill has been used.
The right display will show the total number of miles or kilometers that the walking
belt has moved.
Press the Stop button again to view the following infor- mation:
The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the
console will function normally when you plug in the power cord, press the power switch into the reset posi- tion, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a “d” will appear in the left display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.
An “E” for English miles or an “M” for metric kilometers will appear in the right dis- play. Press the Speed in- crease button to change the unit of measurement if de- sired.
To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the con- sole through the audio jack.
To use the audio jack, locate the audio wire and plug it into the audio jack on the side of the console. Then plug the audio wire into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Adjust the vol- ume on your personal audio player or press the Volume increase and decrease but- tons on the console.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face and not on the console.
23
