2.Attach a Wheel (66) to the base of the Uprights (69) with a Wheel Bolt (64) and a Nut (13) as shown. Do not overtighten the Wheel Bolt; the Wheel should turn freely.
With the help of a second person, carefully tip the tread- mill onto its other side. See assembly step 1, and attach the other Extension Leg (63) and the remaining two Base Pads (57). Then, attach the other Wheel (66) as described above.
With the help of a second person, carefully tip the tread- mill down so the Uprights (69) are in a vertical position.
3.Attach the Left Upper Body Arm (109) to the left Upright (69) with two 3 1/2" Bolts (111), two Washers (52), and two Star Washers (88) as shown.
Attach the Right Upper Body Arm (not shown) to the right Upright (not shown) in the same way.
2 |
| 64 |
|
| |
| 69 | 66 |
|
| |
|
| 13 |
3 |
|
|
109
69 88
52
111
88
4.Insert the tab on one of the Handrail Brackets (21) into the slot in the right Upright (69). Attach the Handrail Bracket with a 3/4" Screw (2) and a Small Star Washer (24).
Attach the other Handrail Bracket to the left Upright (not shown) in the same way.
7
4 |
69 |
Slot |
21 |
24 |
2 |
