ProForm PFTL91205.0 user manual

Models: PFTL91205.0

1 30
Download 30 pages 26.51 Kb
Page 8
Image 8

4.With the help of a second person, carefully tip the Uprights (109) down to the position shown. Make sure that the Extension Legs (105) remain in the Uprights.

Attach each Extension Leg (105) with two 3/4” Tek Screws (47) and a Round Base Pad (121) as shown. Note: Attach the lower Tek Screw (without the Round Base Pad) first.

Attach a Wheel (108) to each Wheel Housing (106) with a Wheel Bolt (107) and a Wheel Nut (21). Make sure that the Wheel Bolts are inserted from the outside as shown. Do not overtighten the Wheel Bolts.

With the help of a second person, carefully raise the Uprights (109) so the Wheels (108) are touching the floor.

5.Remove the knob from the pin. Make sure that the collar and the spring are on the pin. Insert the pin into the Latch Housing (75), and tighten the knob back onto the pin.

Raise the Frame (54) to the vertical position. While another person holds the Frame, hold the Latch Housing (75) against the inside of the Frame. Thread two 3/4” Screws

(6) several turns into the Latch Housing and the Frame.

Align the pin with the hole in the Left Handgrip (76) by sliding the Latch Housing (75) up or down. Make sure that the pin can be inserted fully into the hole. Hold the Latch Housing in place and tighten the two 3/4” Screws (6). Be careful not to overtighten the Screws.

Pull the knob to the right and carefully lower the Frame (54) to the floor.

Note: After a period of use, the Latch Housing (75) may need to be adjusted again to align the pin with the hole in the Left Handgrip (76).

4

 

106

108

 

109

21

107

 

 

 

 

 

 

21

 

 

106

 

 

121

107

 

 

 

108

 

 

 

 

 

 

 

47

 

 

105

 

 

 

121

 

 

 

47

 

 

 

105

 

5

 

 

 

 

 

 

76

 

 

Hole

 

 

 

Pin

Collar

 

 

 

75

 

 

54

6

 

 

 

 

 

Spring

 

 

 

Knob

6.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the walking belt (see page 22). To protect the floor or carpet, place a mat under the treadmill.

8

Page 8
Image 8
ProForm PFTL91205.0 user manual