2.Basic operation
2.1Install battery
Press and slide the battery cover as shown. Insert the lithium battery. Be sure to observe the correct polarity of the battery terminals. Close the battery cover.
2.2Charge Battery
1.Power off the camera.
2.Connect the camera to the computer USB port or an optional USB AC power supply to charge the battery.
3.During charging, the busy light will come on. The light will go out when the battery is fully charged.
2.3Insert SD/MMC/SDHC card
Insert the SD Memory card into the SD/MCC/SDHC card slot. Push it down until the card
7
