![](/images/new-backgrounds/1194028/19402869x1.webp)
|
|
|
| Chapter 3: Management | |
|
|
|
|
|
|
|
|
|
|
|
|
| LEDs |
| State |
|
|
|
|
|
|
| |
|
| Dark | Steady Green | Flashing Green |
|
|
|
|
|
|
|
| Power/Activity* | No Drive | Drive Present | Activity |
|
|
|
|
|
|
|
| Status** | HBA/RAID controller determines the LED behavior |
| ||
|
|
|
|
|
|
| * Refers to SAS drives or SATA drives with an AAMUX adapter. |
| |||
| For SATA drives without an AAMUX adapter, LED behavior depends on |
| |||
| the specific disk drive. |
|
|
| |
| ** Refer to the user documentation for your HBA or RAID controller for this |
| |||
| information. |
|
|
|
|
|
|
|
|
|
|
I/O Module Status Indicators
The VTrak J610s or J310s I/O module has LEDs that indicate activity on each of its ports.
Figure 3. VTrak J610s and J310s I/O Module LEDs
115200
8 N 1
Table Connector (CN2) LED
Subtractive Connector (CN1) LED
I/O Module Status LED
The I/O module status LED shows red at startup. Within 2 or 3 seconds, it turns green to indicate that the I/O module is ready.
LEDs |
|
| State |
| |
|
|
|
|
| |
Dark | Steady |
| Flashing | Red | |
|
| ||||
| Green |
| Green | ||
|
|
|
| ||
|
|
|
|
|
|
Connectors | Link Down | Link Up |
| Activity |
|
|
|
|
|
|
|
I/O Module | Off | Ready |
|
| Starting up* |
Status |
|
| |||
|
|
|
|
| |
|
|
|
|
| |
* Turns green 2 to 3 seconds after subsystem startup. |
| ||||
|
|
|
|
|
|
31