SATAII150 and SATA300 TX Series Quick Start Guide
NOTE: There is a SMP issue on the SuSE Linux SMP kernel. If you encounter problems on SuSE with SMP system, append “acpi=off” parameters into boot loader or select “Installation – ACPI Disabled” on SuSE Linux SMP.
Existing Installation
1.Boot the Linux system and log in as root.
2.Insert SATAII 150 Driver Disk
3.In a terminal window, enter the following commands:
#mount /dev/fd0 /floppy
#cd /floppy
#sh install
Note: At the prompt answer Yes to load SATAII 150 driver every time Linux boots.
#cd /
#umount /floppy
16
