SATAII150 and SATA300 TX Series Quick Start Guide
SATAII150 TX Series Task List
Installation and setup consists of the following steps:
1.Unpack Your SATAII150 or SATA300 Card, below
2.Install the SATAII150 or SATA300 Card (page 3)
3.Install the Disk Drives:
SATAII150 TX2plus or SATA300 TX2plus (page 4) SATAII150 TX4 (page 5)
SATA300 TX4 (page 7)
4.Install Driver (page 9)
Step 1: Unpack Your SATAII150 or SATA300 Card
When you receive the SATAII150 or SATA300 TX2plus card, the package should contain the items listed below:
•SATAII150 or SATA300 TX2plus Serial ATA Controller card
•Quick Start Guide
•Two 0.65 m (26 inch) Serial ATA data cables. 1.5 Gb cables for SATAII150, 3.0 Gb cables for SATA300
•One
•CD with drivers and SATAII150 and SATA300 TX Series User Manual
When you receive the SATAII150 or SATA300 TX4 card, the package should contain the items listed below:
•SATAII150 or SATA300 TX4 Serial ATA Controller card
•Quick Start Guide
•Four 0.65 m (26 inch) Serial ATA data cables. 1.5 Gb cables for SATAII150, 3.0 Gb cables for SATA300
•CD with drivers and SATAII150 and SATA300 TX Series Manual
If ANY of the contents are missing or appear to be damaged, please contact your dealer or distributor immediately.
Warning
Before installing the adapter into an existing system, backup any important or useful data. Failure to follow this accepted PC practice could result in data loss.
2
