Technical Information
Troubleshooting
Before consulting service personnel, check the following chart for a possible cause and solution to the trouble you are experiencing.
Monitor will not turn on
•Make sure the power cord is plugged in.
No picture
•Make sure the power cord is plugged in.
•Check the signal cable connecting the LCD monitor and the computer (refer to page
•Press the POWER button on the front panel of the monitor.
Poor picture or abnormal picture
•Check the DVI cable connecting the LCD monitor and the computer (refer to page
•Press the MENU button to adjust the Brightness Contrast option in the OSD.
•Adjust the Color Select option in the OSD.
•Press the AUTO button on the front panel of the monitor, to automatically adjust the display mode.
Out of range message appears
•Press the MENU button. Highlight the INPUT SELECT icon, then press the MENU button. Press the UP or DOWN button to select DIGITAL INPUT
(refer to page 15).
•If using Windows 9X/2000/XP, wait a few seconds; once Windows detects the problem, a dialog will appear allowing you to manually set up the video mode according to the preset mode timing chart (refer to page 25).
ENGLISH
Xerox© LCD Monitor User’s Manual | 29 |
