Proview XAP series manual Method 2 Digital DVI Connection

Installation

Method 2: Digital (DVI) Connection

1Turn off the computer and unplug the power cable.

2Connect the signal cable (DVI-I) to the DVI port on the back of the computer.

3Connect the audio cable to the line-in port on the back of the computer.

4Connect the power cord to wall outlet and LCD monitor.

5Press the POWER button, located on the bottom side of the main unit to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections.

3 Connect to the Line-in port

2 Connect to the DVI port

4 Connect to power source

14 Xerox© LCD Monitor User’s Manual